The SE-5 is an experimental research electronic instrument designed to accurately detect and help balance Intrinsic Data Fields (IDFs).

Intrinsic Data Fields can be described as informational fields that are the basic blueprints for all living and non-living things. You could think of it as the software of your computer. The series of zeros and ones in your software would look very random to an untrained eye, but given the proper tools to "decode" this information, it becomes your most powerful ally. The same is true with IDFs.

The SE-5 is a consciousness interactive instrument that has been used experimentally to detect and balance the IDFs of plants, animals, minerals, and virtually all animate and inanimate objects. Some people have experimented with the IDFs of psychological states, Chakra balancing and other non tangible areas. IDFs are sometimes referred to as subtle informational fields and are the fundamental blueprints of the third (and other) dimensions.

Some experimental areas include: Health Business Animals Minerals, Mining Homeopathics Acupuncture at a distance Map Dowsing Subtle Energies (Aura, Chakras etc.) and Household uses. Many types "protection" products such as jewelry, pendants, holograms, etc. use the SE-5 to "program" these products to achieve their unusual and effective results.

The Institute of Resonance Therapy in Cologne, Germany has done many studies to determine the effectiveness of the SE-5 at a distance. Here is one example:

They connected a plant to an EEG, and with a photograph sample of the plant, drove with the SE-5, fifty Kilometers away, (about 30 miles). They then began balancing IDFs with the SE-5 and as you can see from the chart in Fig. 6.10 , there is a sharp increase after beginning the balancing, and it then continued to climb. The plant certainly was aware of the SE-5. The institute is continuing to do research in this area and is expanding in their work.

.............Balancing begins













Fig. 6.10

Distance Balancing Experiment The IRT continues research in Germany, Austria, Russia, Czechoslovakia, and elsewhere. Many projects are forty thousand hectares or more. The most important aspect of this research is that we realize we must stop the deterioration of our ecosystem!

Another experiment that they carried out, was by done by taking a picture of one group of trees in a forest, and then sending IDFs to only this group. They monitored these trees for three years. They used a light meter and walked under the trees each year to see how much light was blocked by the tree’s leaves. The second year was a drought year, but as you can see from the chart in Fig. 6.7, the ‘SE-5’ trees were still improving, getting more leaves each year. To make the test even more difficult, the SE-5 trees started out in worse shape than the ‘normal’ trees. The normal trees had a huge decrease the second year and let through much more light. This is attributed to the drought. The third year, the ‘normal’ trees improved over the drought year, but were still in worse shape than the first year. The ‘SE-5’ trees steadily improved over each year. They have done many such studies and now government agencies from several different countries are now hiring the IRT to use the SE-5 on their forests.













Before Balancing (pic on left)



After Balancing (3 years) (pic on right)





By using the SE-5 on plants, one can immediately rule out any kind of placebo effect.

















Product Features

1. ON-OFF SWITCH — Turns the SE-5 1000 power ON and OFF.

2. 100-1000-10,000 SWITCH — Selects range of amplitude measurement, either 0-100 or 0-1000 or 0-10,000.

3. NORMAL-SCAN SWITCH — Selects alternate mode for scanning. NORMAL position allows the AMPLITUDE READOUT to be used for amplitude readings. SCAN allows scanning of new tunings and use of Scanning Probe.

4. MEASURE-BALANCE SWITCH — Selects measuring or balancing mode. MEASURE is used for measuring IDFs. BALANCE is used for IDF patterning experiments.

5. AMPLITUDE READOUT — Shows amplitude strength as set by the AMPLITUDE KNOB. When the 9-volt battery is low, an “LB,” appears at the left of the AMPLITUDE READOUT.

6. CELL (on back) — Holds a sample to he analyzed. The Input Plate and Input Probe also insert into this CELL.

7. AMPLITUDE KNOB — Rotates to set amplitude as shown on the AMPLITUDE READOUT.

8. DETECTOR PLATE — The sensor used to determine amplitude readings. Also used for replicating or duplicating IDFs to a material placed on this PLATE.

9. USB CONNECTOR (on back side) — Connects the SE-5 to a PC for use with SE-5 1000 Software.

— Accepts plug from AC power adapter that connects to the AC power line. The AC adapter supplements the 9-volt battery. Using the AC adapter prolongs battery life.

11. BATTERY COMPARTMENT (on right side) — Holds the 9- volt alkaline battery that powers the SE-5 1000. When an “L” appears on the AMPLITUDE READOUT, replace the SE-5 1000 battery within the next four hours of use.

12. BNC JACK — For connecting the Output Cable to the SE-5 1000.

13. REPLICATOR COILS

14. SCANNING PROBE JACK — For connecting the Infra- Red Scanning Probe to the SE-5 1000. AAAAAA

15. AUDIO JACK — For connecting the Audio Cable to the SE-5 1000.

16. REPLICATOR BUTTON — To activate the Replicator.

17. COMPUTER FUNCTION BUTTONS — To control the internal computer and also the SE-5 1000 Software in your PC.

18. BATTERY COMPARTMENT TAB — Press to open the Battery Compartment to change the battery.



NOTE: Individual experiences are different. We make no claims as to how this product may benefit or affect you.

This is a non-returnable product, and your credit card will be billed at the time your order is placed. Ships manufacturer direct.. please allow additional 7-10 days for delivery, in addition to standard shipping time. An additional $25 shipping charge applies to this item. Standard shipping only. Any special offers are not applicable to this product.